01
Convenience Stores
Cold vaults, walk-ins and beverage equipment across the metro and the I‑25 corridor.
Locations / New Mexico
Our New Mexico team covers Albuquerque and the Rio Grande corridor — refrigeration first, then HVAC, ice and kitchen equipment, plus the project work most service contractors won't take on.
On The Ground In New Mexico
Albuquerque sits above five thousand feet, and thin air is not a footnote for refrigeration. A condenser rated at sea level moves meaningfully less mass here, so systems run closer to their limits all summer and the gap between working and tripping is narrower than most operators realize. We check capacity against the altitude the equipment actually lives at.
The rest is dust and swing. Spring winds load coils fast, monsoon season adds humidity to systems that spent months bone dry, and overnight temperatures drop hard even after hot days. Equipment in this market needs somebody looking at it between failures — which is most of what our New Mexico crew does.
What We Service In New Mexico
01
Walk-in coolers and freezers, display cases, reach-ins, compressor racks, prep tables and low-temp systems. At Albuquerque's altitude the usual shortcuts don't work — we diagnose against measured superheat, subcooling and actual condenser performance rather than nameplate assumptions.
02
Packaged rooftop units, split systems, evaporative cooling, make-up air, exhaust and controls. New Mexico still runs a lot of evaporative equipment alongside conventional DX, and the changeover between them is its own seasonal discipline — one we handle rather than subcontract.
03
Commercial ice machines and bins — cubers, flakers, nuggets and remote condensers. High ambient temperatures and hard water cut production long before a machine actually fails, so cleaning, filtration and condenser airflow go on a schedule.
04
Cook line, prep line and beverage — ovens, fryers, ranges, holding cabinets, dish machines and dispensing systems, handled by the same crew that services your refrigeration and HVAC.
05
New builds, remodels, changeouts and equipment sets — including the rigging and after-hours work that has to happen when the building is closed. Our project crews run these across the whole SRV footprint, and New Mexico work is scheduled from the same bench.
Industries We Serve In New Mexico
01
Cold vaults, walk-ins and beverage equipment across the metro and the I‑25 corridor.
02
Racks, cases and low-temp systems running at altitude through long, hot summers.
03
Walk-ins, line refrigeration, cook line and HVAC across Albuquerque, Rio Rancho and Santa Fe.
04
Distribution, light industrial, hospitality and multi-site portfolios across central New Mexico.
Equipment down in Albuquerque, or planning ahead?
Why SRV In New Mexico
We are measured on whether the equipment held through the hottest part of the day, not on how many hours the ticket shows.
Refrigeration-first training and continued technical development, including the altitude corrections this market requires.
You hear what was found, what was done and what's coming — in writing, before the next surprise.
Find the real fault, carry the part, close the call. A second trip is a failure we own, not a line item on your bill.
A New Mexico crew with seven states of technical backup, parts sourcing, project capability and after-hours coverage behind it.
New Mexico Service Areas
Plus the surrounding central New Mexico communities along the Rio Grande corridor. Ask about your address and we'll give you a straight answer.
We don't have a verified New Mexico field-photo set cleared for publication yet, so this page doesn't pretend otherwise. The project image above is SRV work with an unconfirmed location and is labeled that way. Real Albuquerque photography goes up as our crews here send it in.
An emergency tonight, a portfolio across the Rio Grande corridor, or a project you need set after hours — start with a conversation.